www.1aauto.com 1A Auto shows you how to remove a bumper cover on a 1995 Honda Accord. You need to remove the bumper cover to repair or replace it as well as replace some of the components of in the front end. This procedure is the same for all 1994-97 Accords.
The DPP F150 blew a lower high pressure power steering hose.
A look at the transformation of a 2003 Suzuki ltz 400 as we bring it from rags to riches! All new parts purchased from Rocky Mountain Atv. All used but “new to me” parts purchased from Adrenaline Cycles in Kentucky. Website www.moto-recyclers.net Work done to bike included (I am sure I will miss something) new […]
www.1aauto.com 1AAuto shows you how to remove or replace the interior door panel trim on your vehicle. You need to remove the door panel for a number of different repairs, for example door handles, window regulators, power window motors, door locks and more. This video, will help you do this.
www.1aauto.com 1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old front brakes. This video is applicable to 2001-2007 Ford Taurus, 1996-1997 Thunderbird, and 2001-2007 Mercury Sable models. The procedure is basically the same for many front wheel drive front disc brake equipped vehicles.
WELL HERE IT IS! Part 1 of the Bondo series. I finally was able to start the Bondo work, the weather was causing lots of delays. Please remember I an NOT a pro at body work, I am just a guy who can’t afford to pay hundreds or even thousands to have a pro do […]
Classic bike enthusiast Meatball was organizing his first vintage hill climb event at Glen Helen, so Jamie grabbed a $150 Yamaha TY250 from a junk yard, threw it in the back of a Honda Ridgeline and joined in. Costumes mandatory.
Most GM 2.4 engines will have this problem. It stalls at idle only, never when driving, always restarts AND NO CODES. You can spend a lot of time searching for the problem and searching the scanner for help. Look at this common problem, it just might be what you need to fix it.
In part 10 of my 1976 Mazda Cosmo restoration, I continue the surprisingly long task of shaving the door handles. Last episode I left off after cutting the patch panel to fill the hole in the passenger door. This time I weld the panel in, fix the huge amount of warpage my improper welding technique […]
www.apdty.com Click the above link to find the struts for your vehicle. In this video we’ll show you how to remove and replace the front struts on a 2003 Honda CRV. This is very similar for all CRV struts front and rear.
The red GOLF was was converted to then-state-of-the-art spiral wound Optima batteries by ACPropulsion. Conversion was a team effort, with Paul Carosa doing much of the design and construction. Alan Cocconi was the chief designer of the the Gen I drive system and Battery Optimizer modules. Dave Sivertsen did the battery optimizer controller. This is […]
www.1aauto.com 1A Auto shows you how to remove, install, repair, or replace a broken, worn or rattling front stabilizer/sway bar. This bar is the same for many GM vehicles and the procedure is the same for 1997-2005 Chevy Venture, 1997-2005 Pontiac Trans Sport/Montana, and 1997-2004 Oldsmobile Silhouette.
www.gossipberry.com They’re going to make it to McDonald’s for breakfast if it kills them.
Showing how I displayed fault codes for the rear sonar backup sensors on a 2005 Nissan Titan. Here’s the instructions I used: www.titantalk.com www.titantalk.com
I’m putting the original 305HO back in the Monte after taking the ZZ3 out for my Iroc project. This is mainly to make the car mobile but it may end up tagged with this engine for a while. Previous owner reported that this 305 has over 100k miles on it and has been out of […]